2013 Hyundai Elantra Oil Filter: Essential Guide

The oil filter part number for a 2013 Hyundai Elantra is 26300-35505. This filter is designed to fit the 1.8L L4 Gas engine found in the 2013 Elantra model.
Oil Filter Specifications
The 2013 Hyundai Elantra oil filter has the following specifications:
- Part Number: 26300-35505
- Filter Type: Spin-On
- Thread Size: M20 x 1.5
- Height: Approximately 3.219 inches (82 mm)
- Outside Diameter: Approximately 2.942 inches (75 mm)
This oil filter is designed to operate with all types of motor oils, including synthetic, conventional, and blended varieties.
Replacement Options
While the OEM (Original Equipment Manufacturer) part is recommended, there are several aftermarket options available:
- Mobil 1 M1-104
- FRAM Extra Guard CH9018
- K&N HP-1008
- WIX 51334
These aftermarket filters are designed to be compatible with the 2013 Hyundai Elantra and offer similar performance to the OEM part.
Importance of Regular Oil Filter Changes
Changing your Elantra's oil filter regularly is crucial for maintaining engine health. A clean oil filter helps:
- Remove contaminants from engine oil
- Improve engine performance
- Extend engine life
- Maintain fuel efficiency
It's recommended to change the oil filter every time you change your engine oil, typically every 5,000 to 7,500 miles for the 2013 Elantra.
DIY Oil Filter Replacement
If you're comfortable with basic car maintenance, you can replace the oil filter yourself:
1. Locate the oil filter under the car
2. Place a drain pan underneath
3. Use an oil filter wrench to remove the old filter
4. Clean the mounting surface
5. Apply a thin film of oil to the new filter's gasket
6. Install the new filter, tightening it by hand
7. Start the engine and check for leaks
Always consult your owner's manual for specific instructions and safety precautions.
FAQs About 2013 Hyundai Elantra Oil Filters
- Can I use a different brand oil filter in my 2013 Elantra?
Yes, you can use aftermarket filters as long as they match the specifications of the OEM filter. - How often should I change my Elantra's oil filter?
It's best to change the oil filter with every oil change, typically every 5,000 to 7,500 miles. - What happens if I don't change the oil filter?
A clogged oil filter can lead to poor engine performance, reduced fuel efficiency, and potential engine damage.
Related Posts
-
Bluebird Bus Dash Warning Lights: Essential Guide
26-01-2025 • 231 views -
2000 Honda CRV Spark Plug Wire Order Guide
26-01-2025 • 111 views -
A/C Compressor for 2008 Nissan Altima: Replacement Guide
26-01-2025 • 166 views -
Adjusting Camber Without Camber Bolts: A Practical Guide
28-01-2025 • 137 views -
Key Fob for 2003 Mercury Mountaineer: Essential Guide
26-01-2025 • 139 views
Latest Posts
-
Rear Brake Caliper Piston Won't Compress
01-02-2025 • 258 views -
Are O2 Sensors Covered Under Warranty
01-02-2025 • 280 views -
Power Steering Fluid Leak On Passenger Side
01-02-2025 • 321 views -
How To Turn Off Paddle Shifters Mercedes
01-02-2025 • 274 views -
2015 Chevy Traverse AC Recharge Port Location
01-02-2025 • 291 views
Popular Posts
-
EPC Warning Light: What It Means for Your Vehicle
27-01-2025 • 534 views -
Power Steering and ABS Light On: Causes and Solutions
27-01-2025 • 472 views -
V12 Engine Costs: What You Need to Know
26-01-2025 • 524 views -
EPC Light: Understanding Causes and Solutions
26-01-2025 • 879 views -
2015 VW Passat Oil Consumption Issues Explained
26-01-2025 • 520 views