The 2017 Hyundai Elantra door handle replacement is a relatively straightforward process that can be completed with basic tools and some patience. This guide will walk you through the steps to replace both exterior and interior door handles on your Elantra.

Exterior Door Handle Replacement

Replacing the exterior door handle on your 2017 Hyundai Elantra involves accessing the inner door panel. Here's how to do it:

1. Open the door and locate the small plastic cover near the handle.

2. Remove this cover using a flathead screwdriver.

3. Use an 8mm socket wrench to remove the exposed bolt.

4. Carefully pull the door handle away from the door.

5. Disconnect any cables or rods attached to the old handle.

6. Connect these to the new handle and position it in place.

7. Secure the new handle with the bolt and replace the plastic cover.

Remember to test the new handle before fully reassembling the door to ensure proper function.

Interior Door Handle Replacement

The process for replacing an interior door handle is slightly different:

1. Remove the door panel by unscrewing visible screws and carefully prying off plastic clips.

2. Locate the interior handle mechanism behind the panel.

3. Unscrew the bolts holding the handle in place.

4. Disconnect any cables or rods attached to the old handle.

5. Install the new handle by reversing these steps.

Always be gentle when working with plastic components to avoid cracking or breaking them.

Tools Needed

To complete this job, you'll need:

  • Flathead screwdriver
  • 8mm socket wrench
  • Plastic pry tool (optional but recommended)
  • Replacement door handle

Common Issues

Some common issues with 2017 Hyundai Elantra door handles include:

  • Broken plastic components: The handles are primarily made of plastic and can crack or break over time.
  • Loose or disconnected cables: Sometimes the issue isn't the handle itself, but the connecting mechanisms.
  • Rust on metal components: This can cause sticking or difficulty in operation.

Always inspect the entire mechanism when replacing a door handle to ensure there aren't other underlying issues.

Preventative Maintenance

To extend the life of your new door handles:

  • Avoid pulling on them too forcefully
  • Keep them clean and free from dirt and grime
  • Lubricate moving parts occasionally with a silicone-based lubricant

By following these tips, you can help ensure your new door handles last as long as possible.

FAQs About 2017 Hyundai Elantra Door Handle Replacement

    • How long does it take to replace a door handle?
      With the right tools and some experience, it typically takes about 30-60 minutes per handle.
    • Can I replace just the outer part of the handle?
      In most cases, it's best to replace the entire handle assembly for optimal function and durability.
    • Do I need to paint a new exterior handle?
      If you purchase a handle specifically for your Elantra model and color, it should come pre-painted to match.

Remember, if you're not comfortable with this level of car maintenance, it's always best to consult a professional mechanic. They can ensure the job is done correctly and safely.