The 2020 Hyundai Santa Fe requires regular oil filter changes to maintain optimal engine performance. This guide will provide you with essential information about oil filters for your Santa Fe, including specifications, replacement intervals, and best practices.

Oil Filter Specifications

The 2020 Hyundai Santa Fe uses a spin-on type oil filter. The filter specifications vary depending on the engine type:

  • For the 2.4L L4 Gas engine:

- Height: 3.406 inches (87 mm)

- Outside Diameter: 3.156 inches (80 mm)

- Thread Specification: M20 X 1.5-6H

  • For the 2.0L Turbo engine:

- Height: 3.219 inches (82 mm)

- Outside Diameter: 2.942 inches (75 mm)

- Thread Specification: M20 X 1.5

Both filters feature an anti-drain back valve and a bypass valve to ensure proper oil flow and engine protection.

Replacement Intervals

Hyundai recommends changing the oil filter in your 2020 Santa Fe at the following intervals:

  • For the 2.4L engine: Every 7,500 miles or 12 months, whichever comes first
  • For the 2.0T engine: Every 6,000 miles or 12 months, whichever comes first

However, if you frequently drive in severe conditions such as extreme temperatures, dusty environments, or short trips, you may need to change the oil filter more frequently.

Oil Filter Replacement Process

To replace the oil filter in your 2020 Hyundai Santa Fe:

1. Warm up the engine to operating temperature

2. Raise the vehicle and secure it on jack stands

3. Remove the engine undercover

4. Drain the engine oil

5. Locate the oil filter (usually on the passenger side of the engine)

6. Remove the old filter using an oil filter wrench

7. Clean the filter mounting surface

8. Lubricate the new filter's gasket with clean engine oil

9. Install the new filter, tightening it by hand

10. Refill the engine with the recommended oil type and quantity

11. Start the engine and check for leaks

12. Check the oil level and top up if necessary

Choosing the Right Oil Filter

When selecting an oil filter for your 2020 Hyundai Santa Fe, consider the following:

  • Use a genuine Hyundai oil filter or a high-quality aftermarket filter that meets or exceeds OEM specifications
  • Ensure the filter has the correct dimensions and thread size for your specific engine
  • Look for filters with synthetic media for better filtration and longer life
  • Choose filters with sturdy construction to withstand high oil pressures

Oil Filter Maintenance Tips

To maximize the performance and lifespan of your Santa Fe's oil filter:

  • Always use the recommended oil type and viscosity for your engine
  • Change the oil and filter at or before the recommended intervals
  • Inspect the old filter for any metal particles or debris when changing
  • Check the oil level regularly and top up if necessary
  • Address any oil leaks promptly to prevent contamination

By following these guidelines, you can ensure that your 2020 Hyundai Santa Fe's engine remains well-protected and performs optimally for years to come.

FAQs About 2020 Hyundai Santa Fe Oil Filter

    • Can I use a universal oil filter for my 2020 Santa Fe?
      While universal filters may fit, it's best to use a filter specifically designed for your Santa Fe to ensure proper fitment and performance.
    • How do I know if my oil filter needs changing before the recommended interval?
      Signs include decreased engine performance, unusual engine noises, or the oil pressure warning light coming on.
    • Is it necessary to change the oil filter every time I change the oil?
      Yes, it's recommended to replace the oil filter with every oil change to maintain optimal engine protection and performance.